5 L Liquid Latex 0.6%

Unit Price for 1 EUR 46,18

Unit Price for 2 EUR 45,52 ~~EUR 46,18~~ Unit Price for 5 EUR 41,37 ~~EUR 46,18~~ Unit Price for 10 EUR 38,02 ~~EUR 46,18~~ Unit Price for 20 EUR 36,08 ~~EUR 46,18~~

Our liquid latex is delivered in easy-to-handle 5 L canisters. This high-quality natural rubber latex is ideal for a wide range of professional applications, including mold making, slip-resistant coatings for textiles and footwear, artificial wounds, and general textile bonding. The latex contains 61% rubber.

Natural latex is tapped directly from rubber trees and stabilized with ammonia to keep it in liquid form. This product contains 0.6% ammonia. While completely safe, it may emit a noticeable odor, so we strongly recommend ensuring good ventilation during use. Latex with 0.2% ammonia produces less odor but typically has a slightly longer drying time.

Available in 5, 10, 15, 25, 50, and 100 L quantities.
Each order is packed in practical 5 L canisters for easy handling and storage.

Liquid Latex 0.6% is suitable for:

Creating flexible molds for casting in materials such as concrete or plaster
Textile bonding (e.g., tufting projects)
Anti-slip applications on fabric items like slippers
Use in prop-making and LARP weapon construction

A step-by-step guide for producing your own latex mold is available further down the page.

Important Handling & Storage Information

Liquid Latex and latex molds are sensitive to UV light and must be stored in a dark environment. Do not work with latex in direct sunlight. Additionally, latex is incompatible with oils and with our Metal PRO color pigments.

Recommended storage temperature: 10°C–30°C.

Description

Casting with Liquid Latex

Liquid latex is ideal for creating flexible molds for a variety of applications. You can either brush it onto the model with a standard or silicone brush, or dip the object directly into the latex. The number of layers required depends on the size and complexity of the object, whether you use a thickener, and if a support mold is used. When applying multiple layers, ensure each layer dries completely before applying the next. As the latex dries, it will turn slightly yellow.

Using Thickener:
To reduce the number of coats needed, you can mix 1–5% Thickener into the latex after applying the initial layers, depending on the desired viscosity. This makes the latex thicker and allows for applying heavier layers. Allow extra drying time for latex mixed with Thickener. Note: latex will continue to thicken over time when mixed with Thickener, so it’s recommended to mix fresh batches as needed.

Finalizing the Mold:
Once your mold reaches the desired thickness and the last layer has dried, it is ready for use. Flexibility can be further enhanced by placing the mold in a tumble dryer or oven at 70°C for 2 hours. Ensure the air is humid; place a wet towel in the dryer or a bowl of water in the oven to maintain moisture.

Brush Selection and Cleaning:

For natural bristle brushes: coat with mild detergent before use, clean with water and a stiff brush after use, and store in a sealed bag with some diluted detergent for next time.
For silicone brushes: simply allow the latex to dry and peel off easily from the silicone surface.
Important: liquid latex should never be poured down the drain.

Tinted Latex:

If you want to color you latex, our color pigments can be mixed in to achieve the desired shade.

Shelf Life:
6 months from the purchase date when stored correctly.

Guide to Creating a Latex Mold:

Please note that liquid latex cures by air-drying, which means it cannot be used for pour-casting around the object you want to replicate. For casting by pouring material around the model, we recommend using our Liquid Silicone instead.

Latex molds are also compatible with all types of casting concrete. Certain concrete mixtures generates high heat during the curing process, which can cause the latex mold to soften and become tacky. For heat-intensive materials, use silicone molds for optimal durability and release properties.