Yield Estimates:
- 1 smaller pair of interlocked hands.
- Approximately 3 infant foot impressions.
- 1 full-scale adult foot impression.
*Note: Total yield is dependent on vessel dimensions and subject volume.
"The Normal" Alginate (Standard Set)
- Mixing Ratio: 1.8L water per 450g powder (Yields approx. 2L mass).
- Water Temperature: 35°C.
- Mixing Phase: 2 min (Light blue to deep purple).
- Working Phase: 70 sec (Light purple).
- Setting Time: 60 sec (Returns to light blue when set).
*Note: Timings are indicative.
Due to potential colour variations, submerge the subject immediately after mixing is complete, regardless of the current hue.
Critical Technical Compatibility:
- Single Use: Alginate moulds are disposable and must be cast on the same day as manufacture to ensure dimensional stability and prevent shrinkage.
- Concrete Warning: If your final cast is intended for ConcreteClay™, you must use "The Fast" Alginate. Using "The Normal" or "The Slow" variants will result in an adverse chemical reaction with cementitious materials.
Volume Calculation Method:
- Place the subject in the intended casting vessel in the desired pose.
- Fill the vessel with water to the required coverage height.
- Measure the water volume to establish total displacement.
Body Silicone (10 Shore A) (2 kg kit)
Body Silicone is specifically designed for lifecasting and molding body parts or other objects that come into direct contact with the skin.
EUR 100,27
Customers who bought this product also bought
Blue Nitrile Gloves 50 pcs - Extra-long and Heavy-duty
Particularly suitable for sculpting with ConcreteClay™
EUR 16,06
Thermal Cutter / Hot Wire Foam Cutter (250 W)
Thermal Cutter for EPS. 250W incl. 2 blades: 1 x 250 mm and 1 x 200 mm.
EUR 187,28
